There are no items in your cart.

Log in
Reseller-Status: Nein
To classify you as a reseller in a discount group please send us your business registration.

ECU tuning tool RexXer EVO "User" for Ducati Multistrada 1200 DVT (15-17), Multistrada 1260 (18-), Multistrada 950 / S, Diavel 1260 / S. XDiavel / S

Item number: ZU-RV01EB
Only a few available
RexXer Tuning GmbH
  • XDiavel (2016-)
  • Multistrada 1200 DVT (2015-)
  • Multistrada 1260 (2018-)
  • XDiavel S (2016-)
  • Multistrada 950
  • Diavel 1260
ECU tuning tool RexXer EVO "User" for Ducati Multistrada 1200 DVT (15-17), Multistrada 1260 (18-), Multistrada 950 / S, Diavel 1260 / S. XDiavel / S When using RexXer products, the Vehicle Type Approval will expire and thereby the insurance cover. It s no longer permitted to use the vehicle on public roads! IMPORTANT: The RexXer EVO User is married to the VIN number of the ECU. Thereby it s possible that the RexXer EVO User has still access to the ECU after an update via Workshop tester or another RexXer device. You can flash again your tuning mapping into the ECU. Yet we recommend to flash back the original mapping in advance before each service! +++++++++++++++++++++++++++++ When using a mapping with lambda controll switched off, we recommend to diconnect the lambda plugs permanently "after" the flash! +++++++++++++++++++++++++++++ incl. license and suitable tuning-map! incl. serial interface cable ZU-RV08E!

Optimum driveability?
An important factor for a good running engine is the air-fuel Ratio (AFR), the measurable ratio of air to fuel, which is present during combustion. If the AFR is not optimised the bike can exhibit certain problems e.g. by an excessively lean ratio, which often causes annoying constant velocity shocks, delayed throttle response and performance holes in the power curve. A too enriched ratio, besides poor performance leads to high fuel consumption. The main reasons for these issues are poor set-up at the factory, changes tothe intake or exhaust system. Currently the most common method for adjusting the fuelling map of a bike is the installation of an auxiliary module which is complex and full of compromises or the replacement of the standard engine control unit (ECU), which is costly and often not adjustable racing units. With the RexXer EVO, these measures are a thing of the past! The RexXer EVO allows first to replace the standard tuning map of your ECU against another in only 3 easy steps without a residual auxiliary module. Thanks to the RexXer EVO, the programmer for your series ECU, your standard setup can be changed to a moderate improvement by using free tuning maps of different matching states.

Now the stock mapping and the modified tuning mapping are fix in the device memory and you can change between the maps as often as you want!

Maximum power?
Whatever modifications you have made, if only the attachment of a performance-enhancing exhaust system, a sports air filter, the use of optimized camshaft or pistons with higher compression etc - to exploit the gain in power fully, the engine management has to be adjusted with the appropriate changes! This is accomplished by using a tuning map. This is a specific dataset which is modified to the model and the features controls e.g. the injection, spark advance and many more important maps of the ECU.

Attention: The RexXer EVO "User" only allows the programming (flash) one vehicle and will be married with it s ECU. You will get the RexXer EVO "User" with your requested tuning map. At purchase, you will get a fitting tuning mapping for your bike for fee! If you need another, additional (fee-based) tuning map later, you can you can order it any time with us. You will then get it by E-Mail and the tuning map can be transferred via USB cable from your computer to your RexXer EVO "User". After that, you connect the device with your bike and reprogram it very easily.

Ordering Note: When ordering, please specify the following notes under Step 3 in the "COMMENT" box:
vehicle brand, vehicle model, exhaust system (stock or after-market; brand), air filter (stock or after-market; brand), header (stock or after-market; brand), disable Exhaust Valve?, disable O² Sensor?
The more accurately you provide the information, the better we can choose a suitable mapping for your motorcycle. If something should be unclear on our part or information are missing, we will contact with you in any case.

The latest connection software for the RexXer EVO "User" you always get in the download area on the RexXer site: RexXer download area

- RexXer EVO "User"
- USB 2.0 connection cable, type A-Mini B (5pin)
- Serial interface cable OBD standard (ZU-RV08E)
- Connection software (Windows XP SP3, Windows Vista, Windows 7, Windows 8 and Windows 10 - 32/64 bit version each)
- USB stick with software and documentation such as the manual etc.

Hardware details RexXer EVO "User"
Interface: Micro USB 2.0 + serial interface
Screen: Touch screen LCD display
Dimensions: 12.5 x 8.5 2.5 cm (WxHxD)
Weight without accessories/packing: 137 gram
Color: Black
incl. 19% VAT

Go back


No products have been found.


No products have been found.

Write a review

Please select your rating (1 to 5 stars):

Daniele Moto Intern. OHG
Astheimer Str. 41
D - 65428 Rüsselsheim

Tel.: +49(0)6142/793971-0
Fax: +49(0)6142/793971-80

Opening hours:
Monday - Friday
09:00 - 12:30  and
14:30 - 18:00
(By appointment)

Rating by Bernd S. Sankt Augustin |

Sehr netter freundlicher Kontakt, sehr gute Abwicklung, Fortelock-Fliesen sehr gute Ware die sich einfach verlegen lässt, gerne wieder

Rating by J. A. |

Jederzeit kompetente, freundliche und geduldige Beratung.

Rating by Jochen |

Super schnelle Abwicklung, gerne wieder